When setting up the device:
– Leave a sufficient gap in relation to other objects, and
check that the ventilation slots are not covered in order to
ensure that there is always sufficient ventilation.
– Do not expose the device/mains adapter to direct sources
of heat (e.g. radiators).
– Do not place the device/mains adapter in direct sunlight.
– Do not place the device close to magnetic fields (e.g.
television sets or other loudspeakers).
– Do not place naked flames (e.g. lit candles) near the device.
– Ensure that the connection cable is not taut or bent.
– The device is equipped with non-slip plastic feet. Since
furniture is coated with a variety of varnishes and plastics
which are cleaned with different cleaning agents, it cannot
be completely excluded that some of these cleaning
agents contain ingredients which might damage the
plastic feet, and cause them to become soft. If necessary,
place a non-slip mat under the device.
– Set up and operate all components on a stable, level and
vibration-free surface to prevent the device from falling.
– During the set-up process, maintain a minimum distance of
5 cm around the device for sufficient ventilation.
– Ventilation must not be impeded by covering the device
with objects such as magazines, table cloths and curtains.
DE
FR
NL
ES
IT
EN
331