Mazda 0000-8E-R06A Instrucciones De Instalación página 7

07
Main Hitch Assembly (Two People Required)
• Person 1: Gently pull rear bumper fascia and metal fascia attachment brackets
rearward to allow for main hitch insertion.
• Person 2: Insert main hitch into position.
08
Loosely Attach Side Plates to Main Hitch
• Fasten side plates to main hitch using M12 bolts, flat washers,
conical washers and M12 nuts (see figure A).
• Note: Be sure teeth on conical washers are facing away
from nut.
A
Conical washers
06/14/18
Flat washers
Page 7 of 10
Tools Needed:
19mm Ratchet
4X
4X
M12 Bolt Flat washer
Conical washer
0000-8E-R06A Rev E
19mm
4X
4X
M12 Nut