Publicidad
Idiomas disponibles
Idiomas disponibles
Application
The HPW is a signalling device for warning and calling. The sturdy casing permits use in dry and damp rooms as well as
installation outdoors.
Construction
The actuator system consists of a strong, non-polarized electromagnet, whose plunger strikes the diaphragm approx.100
to 120 times per sec. The casing is constructed from impact resistant ABS-plastic.
The cable entry consists of one self-sealing grommet M20 x 1.5 for cable diameter of 5-13 mm.The relay version has 2
self-sealing grommets M20 x 1.5.
Recycling
The device may be completely recycled as electronic waste. Upon disassembling the devices, the plastic, metal and
electronics components must be disposed of separately.
EMC-Directive
The device complies with the requirements of the new EMC-directive 2004/ 108/CE and the low voltage directive
2006/95CE.
The conformity with the above directives is confirmed by the CE sign.
Instructions for adjustment
Technical data
Input voltage U
i
6 V
12 V
24 V
42 V
60 V
110 V
230 V
120 V
240 V
230 V
6 V
DC
12 V
DC
24 V
DC
48 V
DC
60 V
DC
110 V
DC
220 V
DC
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
50 Hz
60 Hz
60 Hz
50 Hz
HPW11 AND HPW12 TECHNICAL MANUAL TMF0060.A www.eaton.com
HPW11 and HPW12 Technical Manual
Please note the instructions for adjustment acc. to
item 10 in the user instructions
Tolerance U
i
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+ 6/-10 %
+10/-15 %
+10/-15 %
+ 6/-10 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
+10/-15 %
Current consumption
3,4 A
1,2 A
0,65 A
0,3 A
0,25 A
0,15 A
0,07 A
0,15 A
0,07 A
0,07 A
1,0 A
0,6 A
0,3 A
0,24 A
0,15 A
0,08 A
0,05 A
5
Publicidad
