Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING H320-P
PROBLEM
Engine will
not start.
Engine switched 'Off'.
Engine 'flooded' with petrol.
contaminated with oil.
Machine
Belt Tension Incorrect.
does not
vibrate.
Eccentric Unit Damaged.
Engine speed too slow.
TROUBLE SHOOTING H320-E
PROBLEM
Machine
Supply not switched 'On'
will not
start.
Fuse in Plug 'blown'.
Safety Start Button not
depressed preventing
CAUSE
No Fuel.
Fouled spark plug.
Engine cold.
Air Filter clogged or
Major Fault.
Air Filter Blocked.
CAUSE
'On/Off' actuation.
Damaged or
broken power cord.
www.evolutionpowertools.com
POSSIBLE REMEDY
Open Fuel Tap
Fill Fuel Tank.
Switch Engine 'On'.
Remove, clean, reset and replace plug.
Ensure choke setting is correct.
Leave for five (5) mins.
Open choke and fully open the throttle
and try again.
Remove spark plug, clean and replace.
Try again until engine fires.
Replace Air Filter.
Contact Agent or Evolution Power Tools
for further advice.
Adjust the belt tension.
Renew the Air Filter.
Replace eccentric unit.
Increase engine speed slightly.
POSSIBLE REMEDY
Switch on supply at the socket.
Replace fuse and check supply.
Depress Safety Start Button
and then pull Start Lever.
Have the damaged cord replaced by an
identical type fitted by a competent technician.
23
Publicidad
