VIBRATION
WARNING: When using this machine
the operator can be exposed to high
levels of vibration transmitted to the
hand and arm. It is possible that the operator
could develop "Vibration white finger
disease" (Raynaud syndrome). This condition
can reduce the sensitivity of the hand to
temperature as well as producing general
numbness. Prolonged or regular users of
compacting machines should monitor the
condition of their hands and fingers closely.
If any of the symptoms become evident, seek
immediate medical advice.
• The measurement and assessment of
human exposure to hand-transmitted
vibration in the workplace is given in:
BS EN ISO 5349-1:2001 and
BS EN ISO 5349-2:2002
• Many factors can influence the actual
vibration level during operation e.g. the
work surfaces condition and orientation
and the type and condition of the machine
being used. Before each use, such factors
should be assessed, and where possible
appropriate working practices adopted.
Managing these factors can help reduce
the effects of vibration:
Handling
• Handle the machine with care, allowing
the machine to do the work.
• Avoid using excessive physical effort on
any of the machines controls.
• Consider your security and stability, and
the orientation of the machine during use.
Work Surface
• Consider the work surface material;
its condition, density, strength,
rigidity and orientation.
SYMBOLS AND LABELS
WARNING: Do not operate machine
if warning and/or instruction labels are
missing or damaged. Contact Evolution
Power Tools for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
Volts
Amperes
Speed
Alternating current
Sound power level
Read the Manual
Wear Ear Protection
Wear Eye Protection
Wear Dust Protection
Warning
CAUTION: Hot exhaust.
Do not touch
HOT! Do not touch
Hot surface
CE Certification
UKCA Certification
Intertek Certification
Serious Health Hazard
Hazardous To The
Environment
Waste electrical and
electronic equipment
Engine oil 10/30W
Choke open
Choke closed
CAUTION: This is a
4 stroke engine.
Fill with petrol only.
Do not fill with
diesel oil.
Allow motor to cool before
opening the fuel cap.
The vapour is extremely
flammable and may ignite on
contact with a hot surface
or flames.
www.evolutionpowertools.com
V
A
min
-1
(RPM)
~
HOT!
UNLEADED
PETROL ONLY!*
*E5 & E10
HIGHLY FLAMMABLE.
9