Publicidad
Idiomas disponibles
Idiomas disponibles
"Alarms"
In the
section, all alarms generated by the inverter
3.
are collected and stored.
Information shown in the
4.
This tab shows the plant information with the values with
which it was created. Any field can be modified by pressing
the "Properties" button [ ] , to the right of the plant title and
then, in the drop-down menu, by clicking the "Edit" button.
When the retailer changes its electricity rates, the price per
kWh must also be edited, for example.
8. TROUBLESHOOTING GUIDE.
USER MANUAL
"Info"
tab:
In the "CO2 Emission Savings" section, the CO2 values
saved by using solar renewable energy are shown graphi-
cally. These values are measured in kg and are an approxi-
mation of the reduced amount of CO2 produced.
The savings in terms of CO2 emissions and their
equivalence in number of trees planted can be seen in
the "Environmental impact" section. In a conventional
installation, each kWh generated using fossil fuels
generates greenhouse gas emissions. These gases
are classified as gases with a "carbon footprint" and
they are converted into an equivalent in carbon dioxide
(CO2). Therefore, the value shown is the amount of CO2
emissions that an equivalent fossil fuel system would
have generated to produce the energy that the system
(plant) has generated with renewable energy. On the
other hand, trees, with their ability to absorb CO2,
are used in multiple reforestation projects worldwide to
counteract CO2 levels. Using renewable energy sources
helps to reduce the level of CO2 that trees have to absorb.
The number of trees displayed would be equivalent to the
new trees that would need to be planted.
101
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
Publicidad
