Salicru EQUINOX EQX2 4002-HT Manual De Usuario página 81

5.4. INSTALLATION OF THE MONITORING
DEVICE.
5.4.1. Mechanical installation.
The three-phase inverter of the EQX2 series supports WiFi and
RS485 communications.
Plug the WiFi module into the USB (WiFi) port located at the
bottom of the inverter (as shown in Fig. 58). A "click" indicates
that the module has been fitted correctly.
Fig. 58. Communication device connection (WiFi antenna).
USER MANUAL
5.5. METER AND CT CONNECTION.
5.5.1. Steps for connecting the power of the
ESM1 90D24 EQX2 meter.
The ESM1 90D24 EQX2 meter must be connected to the installa-
tion's connection so that it can read its voltage. Connect to holes
1 and 4 as indicated below:
N L3 L2 L1 (*)
Fig. 59. Connecting the power of the ESM1 90D24 EQX2 meter.
(*)
IMPORTANT: respect the order of the phases.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
81