Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
When troubleshooting, always observe the color of the LED:
Status
Power On
Charging
Top-off
Charging
Charge
complete
Battery Fault (*) Red fast blinking
Waiting to
charge (**)
(*) Normally, re-positioning the battery pack resolves the issue.
(**) Battery temperature is too warm, too cold, or wrong power voltage is being
used.
If there is no LED indication:
1.
Check that the radio with battery is inserted correctly.
2.
Make sure that the transformer is plugged into an appropriate AC outlet
and the LED on the transformer is on.
3.
Ensure that the transformer cable is plugged securely into the charger
socket.
4.
Confirm that the battery being used with the radio is listed in Table 1.
Table 3: Rapid Charger LED Indicator
LED Status
Steady green indication for
3 seconds
Green blinking
Green slow blinking
Steady green Indication
Double-flash yellow indica-
tion
The charger has powered up
The charger is currently
charging
Battery in almost fully charged
Battery is fully charged
Battery was not properly
inserted
Battery charging conditions
are not suitable
7
Description
Publicidad
