SICK WTS26-10 Serie Instrucciones De Uso página 41

12 Technical data
12.1 Technical specifications
The "Technical Data" section contains only an extract of the technical data of the sensor.
The complete technical data can be found on the homepage
Features
Sensing range
Min. sensing range
Sensing range max.
Recommended sensing range for the best performance 200 mm ... 500 mm
Reference object
Emitted beam
Light sender
Type of light
Light spot size / distance
Communication interface
Table 7: Communication interface
IO-Link
IO-Link
Data transmission rate
Electrical data
Supply voltage U
B
Ripple
Current consumption
Protection class
1) 16 VDC to 30 VDC, without load
2) 10 VDC to 16 VDC, without load
Digital output
Output current I
max.
Circuit protection
Response time
Switching frequency
1) A = U -connections reverse polarity protected
B
B = inputs and output reverse-polarity protected
C = Interference suppression
D = outputs overcurrent and short-circuit protected
2) Signal transit time with resistive load in switching mode. Deviating values possible in COM2 mode.
3) With a light/dark ratio of 1:1 in switching mode. Deviating values possible in IO-Link mode.
8020355.1GI9/2022-07-13 | SICK
Subject to change without notice
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
OPERATING INSTRUCTIONS
www.sick.com under the part number of the sensor.
WTS26P
10 mm
1000 mm
Object with 90% remission
factor (complies with stand‐
ard white according to
DIN 5033)
WTS26P
LED
Visible red light
Ø 10 mm / 550 mm
WTS26P
1.1
COM2
WTS26P
DC 10 ... 30 V
≤ 5 V
SS
≤ 30 mA 1)
< 50 mA
2)
III
WTS26P
≤ 100 mA
A, B, C, D
1)
≤ 1.4 ms 2)
350 Hz
3)
O P E R A T I N G I N S T R U C T I O N S | WTS26
WTS26G
10 mm
500 mm
200 mm ... 500 mm
Object with 90% remission
factor (complies with stand‐
ard white according to
DIN 5033)
WTS26G
LED
Visible red light
15 mm x 15 mm / 500 mm
WTS26G
1.1
COM2
WTS26G
DC 10 ... 30 V
≤ 5 V
SS
≤ 30 mA 1)
< 50 mA
2)
III
WTS26G
≤ 100 mA
A, B, C, D
1)
≤ 3.3 ms 2)
150 Hz
3)
41
en