Safety Information
Spare parts
Parts without ordering number are not delivered separately
for technical reasons.
The use of other than genuine Atlas Copco replacement parts
may result in decreased tool performance and increased
maintenance and may, at the company option, invalidate all
warranties.
Warranty
Contact the Atlas Copco sales representative within your area
to claim a product. Warranty will only be approved if the
product has been installed, operated and overhauled accord-
ing to the Operating Instructions.
Please also see the delivery conditions applied by the local
Atlas Copco company.
ServAid
ServAid is a utility for providing updated product informa-
tion concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare parts, ser-
vice tools and accessories for the product of your choice. It is
continuously updated with information of new and re-
designed products.
You can use ServAid to present content in a specific lan-
guage, provided that translations are available, and to display
information about obsolete products. ServAid offers an ad-
vanced search functionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco sales repre-
sentative or e-mail us at:
servaid.support@se.atlascopco.com
Safety Data Sheets MSDS/SDS
The safety data sheets describes chemical products sold by
Atlas Copco.
For more information, consult the website
http://www.atlascopco.com/.
Choose Products - Safety Data Sheets, and follow the in-
structions on the page.
Decommissioning
Recycling instruction
When a product has served its purpose it has to be recycled
properly. Dismantle the product and recycle the components
in accordance with local legislation.
Batteries shall be taken care of by your national battery re-
covery organization.
6
© Atlas Copco Industrial Technique AB - 9836 3136 00
Technical data
Technical data
Noise and vibration emission
Noise (in accordance with
ISO15744)
Sound pressure level
Sound power level
Uncertainty
Vibration total value, valid
from 2010
(3-axes value in accordance
with ISO28927-5)
Vibration value
Uncertainty
Noise and Vibration Declaration Statement
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, Atlas Copco Industrial Technique AB, cannot be held
liable for the consequences of using the declared values, in-
stead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
Service instructions
Service instructions
Disassembly / assembly of chuck
LBB16 EP024
dBA
80
-
3
2
m/s
<2.5
-
http://
and selecting 'Tools' then 'Legis-