Publicidad
Connection Configurations
CAUTION
• All the connections in the control panel shall be fully tightened in their respective power outlet. Secure
the connections turning in a clockwise direction.
• The electrode polarity can be modified depending of the soldering job requirements or needs. Remember making tests
in scrap material to define the right configuration before working on the work piece.
Ground clamp connection into the negative
terminal and torch connection (red) into the
positive terminal. The electrode receives the
highest warming. Recommended for gas
welding and solid micro wire.
12
ENGLISH
MIG/FCAW Welding
terminal and ground clamp connection into
the positive terminal. The work piece receives
Start Up
Torch connection (red) into the negative
the highest warming. Recommended for
gasless and core micro wire.
Publicidad
