Pur Line HEATY EX 3000 Manual De Usuario página 13

OPERATION
INSPECTION ITEMS FOR COMMISSIONING
1. Electricity must not be switched on before all installation work has been completed.
2. All wiring connections are correct and tight.
3. All scattered objects must be removed from the body of the radiant heater.
4. Switch on the power to observe the operating condition of the radiant heater.
USE
TURN ON:
Plug the appliance into a mains socket.
Turn the main switch to the on position "I".
Turn off the heater when not in use.
CLEANING & MAINTENANCE
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! DO NOT TRY TO
DISASSEMBLY THE HEATER.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will
damage the heater. NEVER use alcohol or solvents.
STORAGE: Store the heater with these instructions in the original carton in a
cool, dry place.
WARNING : To avoid danger of electric shock, unplug from outlet when not in
use and before cleaning. If the supply cord is damaged, it must be replaced by
the manufactory or its service agent or a similarity qualified person in order to
avoid a hazard.
ES
11