Pur Line HEATY EX2000 RC Manual De Usuario página 10

EN
· Do not operate this appliance with a damaged plug or cord, after a malfunction
or after being dropped or damaged in any way.
· Keep furniture, curtains and other flammable material at least 1 meter away
from the appliance. Never close to curtains and other combustible material,
otherwise may cause risk.
· Do not operate this appliance if the cable or plug becomes damaged.
· Keep the appliance and cable away from sources of heat, sharp objects or
anything that may cause damage.
· If the cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
· Ensure the appliance is switched off before connecting to the mains power
supply.
· Switch off the power supply and disconnect from mains supply when not in
use, before cleaning or other maintenance.
· To disconnect the appliance, switch it off, and then remove the plug from
outlet. Do not pull the cord to disconnect the plug.
· Do not operate in areas where gasoline, paint or other flammable liquids are
used or stored.
· To prevent a possible fire, do not block air intakes or exhaust in any manner.
· Don't touch the hot surfaces.
· Do not insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the appliance.
· Always ensure that hands are dry before operating or adjusting any switch on
the product or touching the plug and socket-outlet.
· Do not leave this appliance unattended when it's in use.
· The most common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by disconnect the
appliance and vacuum cleaning air vents and grilles.
· Do not place the heater on carpet, don't place the cable under carpets. Arrange
cord away from traffic areas so that it will not be tripped over.
· Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
· Do not store away until the heater cools down, store the heater in cool dry
location when not in use.
• CAUTION: Dot use this heater with a programmer, timer or any other device
that switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
8