Publicidad
GB
READ MANUAL BEFORE USE
Precautions when working with batteries
Precautions when working with batteries
1.
Always wear protective clothing e.g. face visor, gloves and overalls when working with batteries.
1.
Always wear protective clothing e.g. face visor, gloves and overalls when working with batteries.
2.
Whenever possible always use a properly designated and well-ventilated area for charging.
2.
Whenever possible always use a properly designated and well-ventilated area for charging.
Do not smoke or bring naked fl ames into the charging area.
Do not smoke or bring naked fl ames into the charging area.
3.
Remove any metallic items from hands, wrists and neck i.e. rings, chains etc. before working on a battery.
3.
Remove any metallic items from hands, wrists and neck i.e. rings, chains etc. before working on a battery.
4.
Never rest tools or metallic objects on top of the battery.
4.
5.
Never rest tools or metallic objects on top of the battery.
When charging is complete disconnect from the mains supply.
6.
The batteries must be removed from the machine before it is scrapped.
5.
When charging is complete disconnect from the mains supply.
7.
The machine must be disconnected from the supply when removing the battery.
6.
The batteries must be removed from the machine before it is scrapped.
8.
To remove the batteries:- Disconnect machine from the mains supply (if charging) and ensure batteries are switched
7.
The machine must be disconnected from the supply when removing the battery.
off using the button that is placed on the battery top. Disconnect hoses from separator and tanks.
8.
To remove the batteries:- Disconnect machine from the mains supply (if charging) and ensure batteries are switched
Remove separator and tanks. Unscrew battery strap fi xings and remove.
off using the button that is placed on the battery top. Disconnect hoses from separator and tanks.
Undo battery terminals and remove. Remove batteries.
Remove separator and tanks. Unscrew battery strap fi xings and remove.
9.
The batteries are to be disposed of safely, as according to local government guidelines.
Undo battery terminals and remove. Remove batteries.
10. Only use genuine Numatic replacement batteries.
9.
The batteries are to be disposed of safely, as according to local government guidelines.
11. Do not allow the batteries to become fully discharged; it may not be possible to re-charge them.
10. Only use genuine Numatic replacement batteries.
Batteries should not be discharged below 22.5 volts with 10 amps fl owing.
11. Do not allow the batteries to become fully discharged; it may not be possible to re-charge them.
12. Do not allow one battery to be discharged separately to the other.
Batteries should not be discharged below 22.5 volts with 10 amps fl owing.
13. Do not mix batteries from diff erent machines.
12. Do not allow one battery to be discharged separately to the other.
14. The batteries fi tted to this product are Lithium-ion (Li-ion), Lithium Iron phosphate (LFP) type.
13. Do not mix batteries from diff erent machines.
The fi tting of any other type of battery may cause a safety hazard.
15. Switch off the battery using top ON/OFF button before cleaning or maintenance.
14. The batteries fi tted to this product are Lithium-ion (Li-ion), Lithium Iron phosphate (LFP) type.
The fi tting of any other type of battery may cause a safety hazard.
Battery Care
15. Switch off the battery using top ON/OFF button before cleaning or maintenance.
1.
Battery Storage:
a.
Batteries must be stored in a dry, level and clean location not exceeding a temperature range of 15°C ~ 25°C.
Battery Care
b.
Batteries must by fully charged every 6 months when on-the-shelf or if the battery voltage reduces to 25V.
1.
Battery Storage:
c.
Batteries must be put into use within 12 months of the date of manufacture, failure to do so will lead to reduced capacity in
a.
Batteries must be stored in a dry, level and clean location not exceeding a temperature range of 15°C ~ 25°C.
the fi eld. (battery date code) -
b.
Batteries must by fully charged every 6 months when on-the-shelf or if the battery voltage reduces to 25V.
c.
Batteries must be put into use within 12 months of the date of manufacture, failure to do so will lead to reduced capacity in
the fi eld. (battery date code) -
d.
If a battery does not want to switch ON and the green LED on the top is not illuminating, irreversible damage has
occurred. Under this condition, a battery should not enter into service and should be disposed of according to local
authority guidelines.
d.
If a battery does not want to switch ON and the green LED on the top is not illuminating, irreversible damage has
occurred. Under this condition, a battery should not enter into service and should be disposed of according to local
2.
During Use:
authority guidelines.
a.
Batteries must be recharged after every use regardless of machine run time.
b.
If the machine is to be left dormant for any length of time complete the following:
2.
During Use:
i.
Fully charge the batteries.
a.
Batteries must be recharged after every use regardless of machine run time.
ii.
Do not leave batteries dormant for more than 6 months.
b.
If the machine is to be left dormant for any length of time complete the following:
i.
Fully charge the batteries.
ii.
Do not leave batteries dormant for more than 6 months.
Daily
Daily
Keep the machine clean.
Keep the machine clean.
Ensure brushes/ pads/ squeegee/ fi lters are in good condition.
Ensure brushes/ pads/ squeegee/ fi lters are in good condition.
Check for any worn or damaged parts and replace immediately.
Check for any worn or damaged parts and replace immediately.
Drain and rinse dirty water tank after every use.
Drain and rinse dirty water tank after every use.
Store machine with brush deck secured in the elevated position.
Store machine with brush deck secured in the elevated position.
Weekly – as daily and –
Weekly – as daily and –
Check brush or pad and skirt and rinse.
Check brush or pad and skirt and rinse.
Check fl oor tool blades for wear and wipe clean.
Check fl oor tool blades for wear and wipe clean.
Clean separator assembly including fi lter and check condition of seal.
Clean separator assembly including fi lter and check condition of seal.
Flush out system with clean water and clean fi lters.
Flush out system with clean water and clean fi lters.
Batteries
Batteries
Always re-charge the batteries after use.
Always re-charge the batteries after use.
Charge for a minimum of 4 hours. Leave the battery on charge overnight, at least once per month.
Charge for a minimum of 4 hours. Leave the battery on charge overnight, at least once per month.
After it has been fully charged, this will prolong battery life.
After it has been fully charged, this will prolong battery life.
Information for Scrubber Dryer
ZP19006F YYW W0 0001
ZP19006F YYW W0 0001
Serial number
Week of Production
Year of Production
Serial number
Week of Production
Year of Production
105
Publicidad
