Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: This Ice Cream Machine contains its own refrigerant which must be allowed to settle
after transport. Leave the Ice Cream Machine on a horizontal surface for at least 12 hours after
purchase or after any move which might have stored the machine the wrong way up.
Leave at least 20 cm on each side of the machine to allow free air circulation. Make sure the vent
slots are free and unobstructed.
I
MPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2012/19/EC.
This product may contain substances that can be hazardous to the environment or to human health if it is not
disposed of properly. We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources. Electrical and electronic equipments should never
be disposed of in the usual municipal waste but must be separately collected for their proper treatment. The
crossed-out bin symbol, placed on the product and in this page, remind you of the need to dispose of
properly the product at the end of its life. In this way it is possible to prevent that a not specific treatment of the
substances contained in these products, or their improper use, or improper use of their parts may be
hazardous to the environment or to human health. Furthermore this helps to recover, recycle and reuse many
of the materials used in these products. For this purpose the electrical and electronic equipment producers
and distributors set up proper collection and treatment systems for these products. At the end of life your
product contact your distributor to have information on the collection arrangements. When buying this new
product your distributor will also inform you of the possibility to return free of charge another end of life
equipment as long as it is of equivalent type and has fulfilled the same functions as the supplied equipment. A
disposal of the product different from what described above will be liable to the penalties prescribed by the
national provisions in the country where the product is disposed of. We also recommend you to
adopt more measures for environment protection: recycling of the internal and external packaging
of the product and disposing properly used batteries (if contained in the product). With your help it is
possible to reduce the amount of natural resources used to produce electrical and electronic
equipments, to minimize the use of landfills for the disposal of the products and to improve the
quality of life by preventing that potentially hazardous substances are released in the environment.
HOW TO CONNECT THE CORD TO A U.K. PLUG: IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
•Green and yellow:
•Blue:
•Brown:
Please, read the instructions given below before connecting the cord to a plug.
If in doubt, please, consult a qualified electrician. As the colours of the wires in
the mains lead of this appliance may not correspond with the coloured
markings identifyng the terminals in your plug, proceed as follows: the wire
that is coloured Green and Yellow must be connected to the terminal in the
plug which is marked with the letter E or the Earth symbol (G), or coloured
Green or Green and Yellow.
The wire that is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red. The wire that is coloured Blue must be
connected to the terminal which is marked with the letter N or coloured Black.
SAFETY POINTS FOR REWIRABLE OR MOULDED PLUG
The mains lead of this appliance may be already fitted with a BS1363 13A plug.
•If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is a moulded on plug),
the flexible cord insulation should be stripped back as appropriate and a suitable 3 pin plug fitted.
•WARNING: Dispose of a plug that has been cut from the power supply cord, as such a plug is hazardous if
inserted in a live 13A socket outlet elsewhere in the house.
•Should the fuse need to be replaced an ASTA marked fuse, approved to BS 1362, of the same rating must be
used.
•Always replace the fuse cover after fitting a fuse. The plug must NOT be used if the cover is omitted or lost until a
replacement is obtained. Make certain that only the correct fuse cover is used and fitted.
•For plugs with detachable fuse cover, the replacement must be the same as the colour insert in the base of the
plug, or as directed by the embossed wording on the base of the plug.
•If the detachable fuse cover is lost a replacement may be purchased from a Service Centre.
•Information for supply may also be obtained from the plug manufacturer.
English
UK USERS ONLY
Earth
Neutral
Live
5
Publicidad
