Snapper 7800707 Manual De Instrucciones página 14

Charging the Battery
The battery in this mower is sealed and maintenance free,
and requires no service other than charging. If the battery
will not accept a charge, bring the mower to an authorized
service center for service.
1. Using the supplied charger, plug the charger connec-
tor into the battery charge port (A, Figure 14). Plug
the charger into a wall outlet and charge the battery
for 12-24 hours. (Longer periods will not damage the
battery.)
Important: Use only the charger supplied with the mower to
charge the battery. Using a different charger may damage
the battery and/or mower.
2. When charging is complete, unplug and store the
charger.
A
Figure 14: Battery charge port
!
WARNING
Keep all sparks, flame and fire away from area when
charging the battery. Never use "BOOST" chargers on
the battery.
14
!
Operation
www.snapper.com