Publicidad
Idiomas disponibles
Idiomas disponibles
Change Engine Oil
!
WARNING
DO NOT attempt any maintenance, adjustments or service
with engine and blade running. STOP engine and blade.
Remove starter insert. Disconnect spark plug wire and
secure away from spark plug. Engine and components
are HOT. Avoid serious burns, allow sufficient time for all
components to cool.
1. Drain the fuel tank completely.
2. Remove the dipstick (A, Figure 16), then turn the
mower on its side. Allow the oil to drain from the oil fill
tube into an appropriate container. Dispose of used oil
properly.
3. Place the mower upright, then fill the engine with
engine oil to the 'full' mark on the dipstick. Briggs &
Stratton warranty-certified SAE30 lawnmower oil is
recommended. Do not overfill.
Figure 16: Draining the engine oil
Service Air Filter
!
!
Never start or run the engine with the air cleaner assembly
(if equipped) or the air filter (if equipped) removed.
Refer to the engine owner's manual for air filter service
instructions.
A
Maintenance
WARNING
!
17
Publicidad
