TFA 35.1164.02 Instrucciones De Uso página 12

Time zone setting
y In the setting mode, use the MAX/+ or -/MIN button to make the time zone
correction (-12/+12).
y The time zone correction is needed for countries where the DCF signal can be
received but the time zone is different from the DCF time (e.g. +1=one hour
plus).
Automatic reset of the maximum and minimum values
y In the setting mode, you can activate (AUTO MIN MAX ON) or deactivate again
the automatic reset of the maximum and minimum values using the MAX/+ or
-/MIN button.
y If the automatic reset is activated, AUTO appears on the display.
y The maximum and minimum values will be reset automatically every midnight
at 0:00 (see "Reset of maximum and minimum values").
Temperature and humidity
Indication of maximum and minimum values
y Press the -/MIN button in normal mode. MIN flashes on the display.
y You can now see the lowest (MIN) values since the last reset.
y Press the -/MIN button and go to the next value. The sequence is shown
as follows: Outdoor temperature, outdoor humidity, indoor temperature,
indoor humidity.
y If you have installed more than one transmitter, press the CHANNEL button to
change between the outdoor transmitters.
y Press the -/MIN button once more to go back to the current values display.
y Repeat the process by pressing the MAX/+ button to see the maximum values.
MAX flashes on the display.
Reset of maximum and minimum values
a) Manual reset
y Press and hold the SET button for 3 seconds during the highest or lowest values
are displayed. The values will be deleted and reset to the current state.
b) Automatic reset
y Provided that in the setting mode the automatic reset is activated (AUTO MIN
MAX ON). AUTO appears permanently on the display.
y All maximum and minimum values will be reset automatically every midnight
at 0:00.
y An interim manual reset is still possible.
22
Comfort level indicator of indoor climate
On the display appears a smiley to indicate the comfort level (Fig.5).
Forecast
Weather forecast symbols
y The weather station has 6 different weather symbols:
sunny slightly cloudy
rainy thunderstorm
y A snow crystal (symbol 6) is shown if rain or thunderstorm is forecasted
and the outdoor temperature on channel 1 is under 0°C. If no transmitter
is connected on channel 1, the device uses the values of channel 2 or 3. If
this respective transmitter is not situated outside or if there is no transmitter
connected, there will be no snow forecast.
y The weather forecast relates to a range of 12 to 24 hours and indicates only a
general weather trend. For example, if the current weather is cloudy and the rain
symbol is displayed, it does not mean the product is faulty because it is not
raining. It simply means that the air pressure has dropped and the weather is
expected to get worse but not necessarily rain.
Trend arrows
y The trend arrows on the display will show whether the atmospheric pressure of
the last 3 hours is increasing, steady or decreasing.
Increase (+1-2 hPa)
Fast increase (>+2hPa)
Steady (+-1hPa)
Decrease (-1-2 hPa)
Fast decrease
(>-2hPa)
cloudy
snowfall
Weather improvement
Significant weather
improvement
Stable weather
conditions
Weather deterioration
Significant weather
deterioration
23