TFA 35.1164.02 Instrucciones De Uso página 13

Location and mounting
y When placed outdoors, choose a shady and dry place for the transmitter. Direct
sunlight may trigger incorrect measurement and continuous humidity damages
the electronic components needlessly.
y Place the base station in any room of the house. Avoid being close to possible
sources of interference that may affect radio reception. It is recommended
to keep a distance of at least 2 metres to possibly interfering sources (TV,
computer, microwave, wireless phones, baby monitors) and large metal objects
(e.g. refrigerator). Within solid walls, especially ones with metal parts, the trans-
mission range can be reduced considerably. In extreme cases, please place the
unit close to a window to improve reception.
y Once the desired location is chosen, check whether the transmission from the
transmitter to the base station is possible.
y If necessary, choose, another position for the outdoor transmitter and/or
receiver.
y If the transmission is successful, you can place or wall mount the base station
and the outdoor transmitter with the suspension device.
y To wall-mount the transmitter, screw the holder to the wall and click the outdoor
transmitter into the holder.
y Do not use the base station in the vicinity of radiators, other sources of heat or
in direct sunlight.
Battery replacement
y As soon as the battery symbol
of the base station or on the display of the outdoor transmitter, change the
batteries of the outdoor transmitter.
y Change the batteries of the base station, when the battery symbol
on the indoor values display.
y Please note: When the batteries are changed, the contact between the trans-
mitter and the receiver must be restored – so always insert new batteries into
both devices or start the manual search for the transmitter.
Additional outdoor transmitters (optional)
y When having more than one external transmitter (max. 3), select a different
channel for each one with the 1/2/3 switch inside the transmitter's battery
compartment. Insert two new AA 1.5 V batteries, polarity as illustrated. Start the
base station operation or the manual search for the outdoor transmitter.
y For the manual search choose the respective channel by pressing the CHANNEL
button.
y Press and hold the CHANNEL button for three seconds. The last registered
transmitter (channel) will be cancelled and the manual search begins.
y Press the TX button in the corresponding transmitter's battery compartment. The
transmission of the outdoor data will take place immediately.
will appear on the outdoor values display
24
y The outdoor values and the channel number will be shown on the base station
display. If you have installed more than one outdoor transmitter, press the
CHANNEL button on the base station to change between the channels 1 to 3.
y You can also choose an alternating channel display. Press the CHANNEL button.
After the last registered channel, a circle symbol
the function press the CHANNEL button again.
y After a successful installation close the outdoor transmitter's battery compart-
ment carefully.
Troubleshooting
Problem
No indication on the base
station/transmitter
No transmitter reception
Display "- -"
for channel 1/2/3
appears
No DCF reception
Incorrect indication
If your device fails to work despite these measures, contact the retailer where you
purchased the product.
will appear. To deactivate
Solution
Ensure the batteries' polarities are correct
Change the batteries
No transmitter installed
Check the outdoor transmitter's batteries
(only use batteries/rechargeable batteries with
1.5V voltage!)
Start the manual transmitter search: Press the
CHANNEL button for 3 seconds.
Restart the transmitter and the base station
according to the manual
Choose another place for the outdoor transmit-
ter and/or the base station
Reduce the distance between the outdoor
transmitter and the base station
Check if there is any source of interference.
Press and hold the -/MIN button for three
seconds and start the initialisation manually.
Wait for an attempt reception during the night
Choose another place for your device
Set the clock manually
Check if there is any source of interference.
Restart the instrument according to the manual
Change the batteries
25