Be Cool easy Manual De Instrucciones página 25

EN
then pull the handle. Then shift the sitting position to
the second position and shrink the top tether to the
shortest.
2_ Press the ISOFIX button at the bottom of the seat
forward and backward with your hand, push the ISOFIX
on both sides to the maximum, press the end of the
ISOFIX, and it will not be retracted.
3_Insert the ISOFIX of the baby safety seat into the
corresponding ISOFIX fixed point of the car, and a click
will be heard to display green in the display window.
It will display red in the window before ISOFIX inserted
correctly.
4_ Push the baby car seat to the back of the car seat to
make them fit tightly. Shake the seat from side to side
to make sure it is effectively fixed.
48
ADULT SAFETY-BELT
A_ Step five: Settle the child in the car seat, adjust
the headrest to the right position, place the upper
end of the car seat belt diagonally through the
guide hook slot at the bottom of the head, the
lower end of the diagonal band passes through
the corresponding guide mark, the cross band
passes through two left and right guides, finally,
the car seat belt clasp is attached to the seat belt
buckle, you will hear the click when it is securely
fastened, the child's pelvis should be held firmly
when the belt is worn.
Don t use force-bearing points without marking
11. REMOVING THE COVER
1_ Removal of headrest cloth cover: Headrest cloth
cover can be removed by releasing rubber band.
Remove chair body cloth cover:open the two sides of
the chair and the four button on the two
sides of the head, and then cover on the chair can be
removed
EN
49