Be Cool wagon Manual De Instrucciones página 42

WARNINGS
EN
The metal parts and plastic parts of the
safety seat must be fastened by referring
to manual, which ensures the safety seat
does not get caught on the vehicle seat or
in the door.
Any straps securing the child restraint
system to the vehicle should be tight, and
any straps securing the child should be
adjusted to fit the child's body, and the
straps should not be twisted.
The lap belt is worn low down, so that the
pelvis is firmly secured.
The safety seat must not be used after it
has been involved in an accident.
It is dangerous to make any alterations or
additions to the safety seat without the
manufacturer's approval, and the insta-
42
llation instructions provided by the child
restraint manufacturer must be followed
closely to ensure the child's safety.
The safety seat should be kept out of
direct sunlight, otherwise it may be too
hot for the child's skin.
Please do not leave your child in their
child restraint system unattended.
Any luggage or other objects liable to
cause injuries in the event of a collision
must be properly secured.
a: The child restraint must not be used
without the cover.
b: The seat cover should not be replaced
with any other than the one recommen-
ded by the manufacturer, because the
cover constitutes an integral part of the
child restraint system.