Descargar Imprimir esta página

Be Cool wagon Manual De Instrucciones página 45

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

until you hear it click into place. Check the rotation
indicator is green.
Attention: the rotation function is activated after the
support leg has been fully opened
SIT. SIDE IMPACT PROTECTOR
FUNCTION
1_ Your car seat is fitted with a spacer which, in the
event of side impact, creates some distance between
the side of the seat and the collision zone. This SIP
should be activated on the side nearest the vehicle
door.
4. i-size universal (40-105 cm): ISOFIX+-
Support Leg+ five-point harness
Attention
A. Suitable for models with ISOFIX systems which
pass ECE R14 .
B. This i-size seat is installed in the rearward facing
position, suitable for children of 40-105 cm. Only
one seat can be fitted in the fifth position.
C. i-size seats must not be installed on seats fitted
with active airbags.
D. IMPORTANT- DO NOT USE IN THE FORWARD
FACING POSITION BEFORE THE CHILD IS 15 MON-
THS OLD (Refer to the instruction manual)
E. lmportant - The seat should not be used in the
side position while driving.
I-SIZE (40-105 cm) (rearward facing)
1_ Extend the support leg and fit it in place making sure
the indicator turns green.
2_ Press the ISOFIX button at the bottom of the seat
forward and backward with your hand, extend the ISO-
FIX connectors on both sides to the maximum length,
press the end of the ISOFIX, and it will not be retracted.
3_Insert the ISOFIX connectors of the child car seat
into the corresponding ISOFIX anchors of the car, you
will hear them click locked and the display window will
show the green symbol. The window will display the red
symbol if the ISOFIX connectors are inserted incorrectly.
4_ Push the child car seat firmly against the backrest
EN
45

Publicidad

loading