KBT 128 Modo De Empleo página 2

INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
1. Please keep this instruction sheet safely for future reference.
2. Please do not modify the product or the assembly details in any way. Modifications will affect the structural in-
tegrity and replacement parts will be at the buyer's expense. Inappropriate use or faulty application of the
product are explicitly forbidden and absolve the manufacturer of all liability. This product needs to be mounted
by an adult before use.
3. The use of the item is allowed only under continuous supervision by an adult. The product is suitable for individ-
uals weighing up to 70 kg. The product is not suitable for children under 36 months, due to a lack of extra
safety precautions and taking into account the limited mental capacities of toddlers.
4. This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 and EN 71-8. It is
only suitable for family domestic use, both indoors and outdoors.
5. When installing the product, ensure that the play system or other construction can support the weight (minimum
200 kg) and that there is no risk of entrapment.
6. The product should be at a distance of at least 2 m from all other installations e.g. fences, branches, clothes-line,
...
7. In this safety area no hard, angular or pointed objects should be present. The surface underneath the product
should be flat and shockabsorbing. The product must not be placed on asphalt, concrete or any other hard
surface. We advise the removal and storage of all accessories during the winter because the characteristics of
the soil (when frozen) are not suitable for safe play.
8. When mounting or assembling the product, attention should be given that the impact area has the minimum
required distance between the product and eventual obstacles: walls, fencing,... The free falling space should be
like specified by the grey area as shown drawing FIG I.
9. The distance between the ropes of the nest swing shall be 12 cm wider on top of the ropes than below next to
the product itself.
10. The minimum distance from the bottom of the swing seat to the ground surface shall not be less than 35 cm.
The minimum distance between the swing seats should be 45 cm. The minimum distance between the swing
seat and the frame should be 30 cm.
11. Specific instructions for adjusting the ropelength : see FIG II. Ensure that the product hangs horizontal after
adjustment of the ropes.
12. Please ensure that the crossbeam is never higher than 2.5 m. Please make sure that children do not climb the
product to reach the top beam.
13. All pieces should be checked regularly. For replacement material and expansion of the playground equipment,
please contact the supplier. Consequently safety will be guaranteed.
14. This product can only be used in combination with sufficiently strong swing hooks with a nylon bearing. Only in
this case the safety can be ensured. It is explicitly forbidden to use the metal rings on a suspension system
without a hinged element.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials used or other
factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...). Special
attention should be given to the swing hooks, rings, eights, plastic welds and ropes. Moving metal parts must
be oiled regularly.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
2
tyre swing
EN