Kenmore AllergenSeal FeatherLite Lift-Up Hair Eliminator DU4099 Manual Del Usuario página 22

HEPA MEDIA EXHAUST FILTER CLEANING
2. Press the release tab and remove the
HEPA media exhaust filter from vacuum
cleaner.
3. Wash with cold water only. DO NOT
use detergent or soap. Allow to air dry.
Allow parts to dry 24 hours before
putting back into vacuum cleaner.
NOTE:
DO NOT operate without
exhaust filter installed.
DO NOT wash in the dishwasher.
DO NOT install the filter if damp.
4. Reinstall the HEPA media exhaust filter
into the vacuum cleaner until a click is
heard.
HEPA
Media
II
Exhaust
Filter
I
Release
Tab
- 22 -
5. Insert the exhaust filter cover tabs into
the upper slots and lock the exhaust
filter cover into place by pressing the
lower part of the cover until a click is
heard.
NOTE:
Make sure the exhaust filter
cover is properly installed.
Slots
I
II
Tabs