Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING
WARNING
The LP tank used with this Flat Top Griddle must meet the following requirements:
• Use appliance only with LP (propane) gas and the regulator/valve assembly supplied.
• Installation must conform with local codes, or in their absence with National Fuel Gas Code, NFPA 54/ANSI Z223.1. Handling and
storage of LP cylinders must conform to LP Gas Code NFPA/ANSI 58.
• Do not modify this appliance. Modifications will result in a safety hazard.
• Apartment Dwellers: Check with management to learn the requirements and fire codes for using an LP Gas appliance at an apartment.
If allowed, use outside on the ground floor with a 10-foot clearance from walls or rails.
CONNECTING HOSE + ADJUSTABLE
REGULATOR
20 LBS. TANK
1. Place LP tank on tank support bracket and secure
with tank retention wire or level, and stable surface.
2. Make sure burner valve is on off position.
3. LP tank should be in the OFF position. If not, turn
wheel clockwise until it stops.
4. Remove the protective cap from LP tank valve. Always
use cap and strap supplied with OPD valve.
5. DO NOT USE A POL TRANSPORT PLUG (plastic part
with internal threads)! IT WILL DEFEAT THE SAFETY
FEATURE OF THE VALVE.
6. The hose and regulator is equipped with Quick
Connect. Align the insert fitting on the regulator to the
quick connect insert on the side of the griddle. Pull
back the spring-loaded coupling then push the into
insert firmly and release. The Quick Connect will snap
in and lock in place.
20 LBS. TANK
Leak Check
17
Publicidad
