Publicidad
Idiomas disponibles
Idiomas disponibles
Run a narrow bottle brush
3
through burner venturi several
times. (Do not use wire brushes.)
Brush the entire outer burner
4
surface to remove grime and rust.
Clean any blocked ports with a stiff
5
wire such as an open paper clip.
26
Reinsert each burner carefully, then fasten with
6
1-M5 x 12 screw.
Burner
CAUTION
Burner venturi tubes must be reengaged
with the valve openings.
Gas Orifice
Valve Outlets
Publicidad
