Sleep.8 LUCKY Instrucciones De Montaje página 3

Before assembly :
1)
Check the appearance and completeness of items in the packaging. Damage claims are accepted only for
products with NO evidence of assembly.
2)
Keep the packaging until assembly is completed! If defects or missing parts are noted during assembly, the
pack must be kept until the arrival of Seller's representative.
3)
Check the number of items and fittings according to the picking list, divide the fittings into groups. The
manufacturer reserves the right to make construction changes in the product, replace fittings and hardware
with equivalent items that do not detract from the appearance, nor affect the functionality of the product.
4)
Follow the assembly sequence in these instructions! Manufacturer's warranty obligations become void if
instructions for assembly and use are not followed. Assembly and operating instructions must be retained for
the entire product life cycle.
5)
Carry parts with care, without pulling. Place parts on steady surfaces. Avoid dropping or banging! Assemble
the product on a flat surface.
Cross screwdriver
Packaging
№1
№2
№3
№4
To assemble you need:
Part
Seat
Back cushion
Linen box
Strip
Back cushion
Through nut М6*12, galvanized
Sunk screw 6*30
Assembly instructions
Operating manual
Rear backrest
Armrests
Picking list
Quantity
Figure
1
1
1
1
1
2
2
1
1
1
2
UK