Tennant T981 Manual De Instrucciones página 19

- Turn the ignition key to switch the machine on.
- Press the Attach/release brush button, the
which immediately enables the coupling operation;
now the machine is ready for the coupling step,
which can be accomplished by pressing the brush
coupling and release button again.
Fitting the brushes (Cylindrical Brush
Model)
! ATTENTION: before carrying out the operations
apply the parking brake.
! NOTICE
Where the terms RIGHT and LEFT appear, this is
always referred to the forward movement of the
machine
Assembly:
-
- Remove the cover from the brush compartment
by pulling the release lever.
EN 19