Tennant T981 Manual De Instrucciones página 20

- Position the roller brushes in the two compartments,
making certain that the guide pin on the opposite
side is correctly located.
-
Disassembly:
- Repeat the steps described above in reverse
order.
Fitting the side brushes (Cylindrical Brush
Model)
! ATTENTION: before carrying out the operations
apply the parking brake.
! NOTICE
Where the terms RIGHT and LEFT appear, this is
always referred to the forward movement of the
machine
Assembly:
- Undo the screw on the motor shaft.
- Check that the drive key is located in the keyway
of the motor shaft.
-
motor shaft.
- Retighten the clamp screw.
Disassembly:
- Repeat the steps described above in reverse
order.
EN 20