Emptying the solution tank
! ATTENTION: before carrying out the operations
apply the parking brake.
The detergent solution tank can be emptied by proceeding
as follows:
-
Take the machine to the designated service area.
-
Unhook the hose from the clip.
-
Empty the tank by way of the drain hose: keep
the hose raised initially and remove the plug, then
lower the hose gently and position it over the drain
outlet.
Emptying the cylindrical brush debris bin
! ATTENTION: before carrying out the operations
apply the parking brake.
To empty the cylindrical brush debris bin, rotate the bottom
of the bin clockwise then pull bin directly outward. Empty
the debris and wash the bin.
Removing the the Brush/Pad Holder
! ATTENTION: before carrying out the operations
apply the parking brake.
-
Turn the ignition key to switch the machine on.
-
Press the Attach/Release brush button, and the
machine will perform the release operation;
EN
28