UFESA AE4822 sena Manual De Instrucciones página 25

3. Lift to remove the sponge filter and high-efficient filter.
4. Rinse the filters thoroughly under the running cold water. Do not use soap or other cleaning solvents.
5. COMPLETELY air dry the filters before reassembling. Do not use hair dryer to dry the filter. This may
cause the filter to warp.
Cleaning the brush roll:
1. Remove the brush roller from the brush housing. Slide the brush roller fastener "A" away from the
brush as below.
2. Carefully clean and remove the hairs and debris from the brush roller. Wipe to clean only, do not use
any soap or harsh cleaning solvents.
3. If brush roller becomes damp, allow to dry naturally before replacing.
4. Slide fastener "A" to original position to secure the brush roller.
25