LEGRAND C2G31011 Manual Del Usuario página 11

HDMI® HDBaseT + USB-C®, 3.5mm, and USB-B to A over Cat Extender Wall Plate
Transmitter to Box Receiver - 4K 60Hz
Upgrade (cont'd)
Legrand Product Firmware Updater
•
1 (see Figure 1):
•
Select the correct model. (Upgrade transmitter: select C2G31011-TX;
Upgrade receiver: select C2G31011-RX)
RS232:
•
Port: Select the correct COM Port number.
Baud rate: Select the correct baud rate, the correct baud rate for
upgrading TX is 115200, and upgrading RX is 57600.
Connect: Click the button to connect with the device.
FW version:
•
Click "Check" button to check the current firmware version of the device
after successful connection.
Update File:
•
Click "Browse" to select the FW upgrade bin file from the local PC.
Update:
•
Click the button to start upgrading firmware after the bin file is uploaded.
Log:
•
Show the log of the operations on the software and returning information
of the device.
Clear:
•
Click the button to clear up all the log in the white box.
2 (see Figure 1):
•
The progress bar will show the upgrading process.
5. Figure 2, click "Browse" to select the upgrade bin file from the local PC and
click "Update" to start upgrading firmware of the receiver.
Note: Don't power off the device during upgrade process.
9
(us)
(us)
Figure 1
Figure 2