Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI® HDBaseT + USB-C®, 3.5mm, and USB-B to A over Cat Extender Wall Plate
Transmitter to Box Receiver - 4K 60Hz
Product Overview
Front Panel
①
②
F
P
D
RONT
ANEL
ESCRIPTION
1
HDMI IN
Connect to an HDMI source using an HDMI cable.
2
USB-C IN
Connect to a USB-C source using a USB-C cable.
Restore factory defaults. When the transmitter is powered on,
3
Reset Button
use a pointed stylus to hold down button for five or more
seconds and then release.
LED On: Only one light will be on at a time, indicating which
4/5 HDMI / USB-C LED
input is selected.
On: HDCP protected content is being transmitted.
6
HDCP LED
Blinking: Non-HDCP protected content is being transmitted.
Off: No content is being transmitted.
On: HDBT link is normal.
7
Link LED
Off/Blinking: No HDBT link or link error.
On: Power is applied to the device.
8
Power LED
Off: No power is applied to the device.
④
⑥
③
⑧
⑤
⑦
Transmitter
⑨
⑩
⑪
⑫
⑬
Rear Panel
9
INPUT Button
Short press: Switch input source.
Short press: Turn display on.
10
DISPLAY Button
Long press: 3 seconds to turn off display.
Connect one-way analog audio pass through from wall-plate
11
AUDIO IN
transmitter to receiver.
12
USB-B Host Port
Supports USB 2.0 pass through over HDBT.
Supports firmware updates or controlling the transmitter
13
USB Micro-B IN
through API commands.
R
P
D
EAR
ANEL
14
HDBT OUT
Connect to the receiver via a Cat 5e/6/6a/7 cable.
15
Power
Pins 12V and G are used for local DC 12V input.
2
Transmitter
ESCRIPTION
(us)
(us)
⑭
⑮
Publicidad
