Publicidad
Idiomas disponibles
Idiomas disponibles
HDMI® HDBaseT + USB-C®, 3.5mm, and USB-B to A over Cat Extender Wall Plate
Transmitter to Box Receiver - 4K 60Hz
Cable Installation
Note: Before installing cables, please ensure the unit is disconnected
from the power source.
1.
Connect HDBT: Connect HDBT Out of the transmitter to the HDBT
IN of the receiver using a Cat 5e/6/6a/7 cable.
2.
Connect HDMI and Audio OUT: Connect an HDMI display device
(e.g. TV, monitor, projector, LCD/LED display, etc.) to HDMI OUT
and connect audio receivers (e.g. amplifier, speaker, etc.) to AUDIO
OUT of the receiver.
3.
Connect Power Adapter: Connect the provided power adapter to
the receiver. With PoH support, it is able to send power to the
transmitter; no additional power adapter is required at the
transmitter.
4.
Connect HDMI IN and USB-C IN: Connect an HDMI source device
(e.g. Laptop, Blu-ray player, etc.) to HDMI IN and connect a USB-C
source device (e.g. Laptop, tablet, etc.) to USB-C IN of the
transmitter. Select a desired video source through automatic or
manual switching function.
5.
Connect USB-B HOST PORT: Using the included USB-A to B Cable,
connect the USB-A end to source device (e.g. Laptop, etc.) and
connect the USB-B end to the USB HOST PORT on the wall plate
transmitter.
6.
Connect USB DEVICES: Connect up to four USB devices (e.g.
keyboard, mouse, USB camera, etc.) to the USB DEVICE ports of the
receiver.
7.
Connect Additional Device Control: Connect a control PC to the
Micro-B USB port of the transmitter or to RS232 port of the
receiver to control the transmitter via API commands. For more
information, see Device Control section.
8.
Power on all attached devices.
5
(us)
(us)
Publicidad
