Publicidad
Idiomas disponibles
Idiomas disponibles
PM Indicator
AUX Indicator
ALARM 1 Indicator
PREPARATION FOR USE
AC-DC adaptor connection: The retro radio unit can be powered
by an external AC-DC adaptor, required the output DC 5V 1.5A
(included).
POWER CONNECTION
Plug the AC-DC adaptor to a household outlet AC source, connect
the adaptor's DC output plug to the DC POWER INPUT Jack of
the main unit. This unit is equipped with a battery back up system;
it requires a "AAA" batteries x 2 (not included). Insert the battery
in the battery compartment, making certain that the positive and
negative (+and-) battery terminals are attached to the corresponding
terminals on the plate in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power
supply, the clock and timer memory continue running. When the AC
power resumes, the clock switches back to AC again.
TO SET CLOCK MANUALLY:
1. Press and hold the CLK.ADJ. button (3) in standby mode and
keep depress over 2 seconds to enter time set mode. The
display "24 Hr" will flash.
2. Turn the SET KNOB (12) to adjust the "12 Hr" or "24 Hr" mode.
3. Press the CLK.ADJ. button (3). The time display will flash.
4. Turn the SET KNOB (12) to adjust the clock and press the clock
adjust button the clock setting is complete.
Note:
-
Press SKIP BACK BUTTON (7) button to adjust data backward.
-
Press SKIP FORWARD button (9) to adjust data forward.
-
Keep depress SKIP BACK (7) or SKIP FORWARD (9) button for
2 seconds to enable auto forward.
LED DISPLAY
TIME Indicator
ENG-2
BLUETOOTH Indicator
FM Indicator
ALARM 2 Indicator
Publicidad
