Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE ALARMS:
1. Press and hold the (4) alarm 1 or (6) alarm 2 button until the
alarm time flashes.
2. Turn the SET KNOB (12) to set the desired alarm time, Press the
alarm button the setting is complete.
Note:
-
Press SKIP BACK button (7) to adjust data backward.
-
Press SKIP FORWARD button (9) to adjust data forward.
-
Keep depress SKIP BACK (7) or SKIP FORWARD (9) button for
2 seconds to enable auto forward.
ENABLE / DISABLE THE ALARM
Press and hold the "ALARM 1" (4) / "ALARM 2" (6) button to enable
or disable the alarm. Once the alarm is activated, the bell symbol
will be appeared on the display.
ALARM DURATION
Beep alarm or radio alarm will continue output for 60 minutes if no
key press, then it will stop automatically and wait for same alarm
time on next day.
SNOOZE FUNCTION
When the alarm rings, press Snooze button (5) will activate the
snooze function, Beep alarm or Radio alarm will stop.
Note: The interval time of the snooze is 9 minute (not include second
offset)
Snooze will continue unless press ON/OFF button (1) to alarm off of
Buzzer alarm or Radio Alarm stop automatically after 60 minutes.
SLEEP OPERATION
When listening to radio, press Sleep button (5) to enter sleep mode.
You can just adjust the sleep timer from 120 mins to 10 mins by
pressing the Sleep button (5). The unit will automatically turn off
after the selected time.
DIMMER CONTROL
In standby mode, press the DIMMER (5) button allows you to set the
brightness of the LED display to high, low levels.
1. The clock display with dimmer low is the default setting.
2. It will consume more power if you set the clock display with
dimmer higher.
ENG-3
Publicidad
