Denver CRB-619 Instrucciones De Uso página 7

PLAYING AUDIO WIRELESSLY
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected Bluetooth Device to
select a track.
3. To play or pause the selected track, use the native controls on
the connected Bluetooth Device or press the Play/Pause button.
4. Audio played through the connected Bluetooth device will now
be heard through the speakers.
CHANGING THE BLUETOOTH CONNECTION THE NEW MOBILE
PHONE
Press and hold the Pair button (8) for 3 seconds. The pair indicator
will flash quickly and the radio will produce a confirmation tone.
Select and confirm the pairing on your new mobile phone.
NOTE:
Some mobile phones may connect and disconnect as you make and
end calls. This is not an indication of a problem with your unit.
Occasionally while using your device you may notice unexpected
Bluetooth behavior such as disconnects, intermittent music sound,
Restart your Bluetooth accessory by turning it off and then on
connectivity again.
LINE IN
Requires a 3.5mm audio cable (no included)
1. Connect the 3.5mm audio cable to the Line In on the unit and an
audio output on an MP3 player or other audio source.
2. Press the Source button to switch to Line In mode.
3. Use the native controls on the connected MP3 player or other
audio source to play and control audio played through the retro
radio.
USB CHARGING SOCKET
USB devices: DC 5V
The product functions as a charger for your mobile phone and USB
device.
The connector or the USB charging cable is not supplied. (The
cable length does not exceed 3m).
ENG-6