Denver CRB-619 Instrucciones De Uso página 5

LISTENING TO RADIO
1. Press the POWER ON-OFF button (1) to turn the unit on. Press
SOURCE button (2) to select radio play mode, Turn the Set
Knob to tune radio to a desired station.
2. If you press and hold the SKIP FORWARD button (9) or SKIP
BACK BUTTON (7) button for one second, then release, the unit
will automatically scan to the next broadcasting station.
3. Press the POWER ON-OFF button (1) to turn the radio OFF.
TO SET / RECALL THE RADIO PRESETS
1. Press the POWER ON-OFF button (1) to turn the unit on. Press
SOURCE button (2) to select radio play mode, Turn the Set
Knob to tune radio to a desired station.
2. If you press and hold the SKIP FORWARD BUTTON (9) or SKIP
BACK BUTTON (7) button for one second, then release, the unit
will automatically scan to the next broadcasting station.
3. Press and hold the memory / memory up button and keep
depress over 2 seconds; "P01" will blink in the display.
4. Press the memory / memory up button again to set the preset.
5. Repeat steps 2 through 4 to set more presets.
6. The unit can preset 10 stations totally for FM.
7. When "P01-P10" is blinking, press the SKIP FORWARD
BUTTON (9) or SKIP BACK BUTTON (7) to select the preset
number.
8. When recalling preset stations, press the memory up button (8)
to select the preset number.
NOTE:
Ensure that the FM antenna is completely unrolled and extended for
best FM reception.
BLUETOOTH SETUP
Bluetooth connectivity performance may vary with brand and model
of the connected device. For best performance, please connect
newer Bluetooth devices incorporating Bluetooth 2.1+EDR and
using the latest firmware update available from the device vendor.
Compatibility with all devices and media types is not guaranteed.
Bluetooth performance considerations Ensure all Bluetooth devices
within 30 feet have Bluetooth transmission disabled. The presence
of other functioning Bluetooth devices during Connection may
lead to operational difficulties. Bluetooth is a short-range radio
ENG-4