Hansgrohe Axor Starck 10101001 Instrucciones De Montaje / Manejo / Garantía página 10

3
2
4
1
1
10
3
1
2.5 mm
3
2
English
Connect the faucet power cable to the battery pack.
Open the hot and cold supplies.
Wait 30 seconds before attempting
to use the faucet.
Position your hand in front of the sensor to turn the
water on.
Due to air in the faucet, the spray pattern may be
unattractive for the first 10 - 15 uses after installation
or service.
Models with manual temperature adjust-
ment only: Pull the temperature lever forward to
make the water cooler, backward to make it warmer.
Temperature adjustment -
10106xx1 /10175001 only
Turn the water supplies off.
Disconnect the faucet power cable from the battery
pack.
Remove the screw from the rear of the faucet.