Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION (CONTINUED)
Installation Steps:
1.
Remove the pre-assembled Exhaust Hose Connector, Exhaust Hose, and Window Bracket Panel
Adapter from the package.
2. The Window Brackets are approximately 19.7" (50 cm) each, allowing you in install to windows
and balcony doors of different heights or widths.
Adjustable Knobs
To install the window bracket to the window frame, you need to adjust the height or width of the
window bracket by extending the length according to the height or width of the window. When the
length is set, tighten the Adjustable Knobs (preinstalled on the window bracket) to ensure the window
bracket is secured in the desired position. Use one or all three pieces of window bracket as needed.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
Hose:
Length: 12" to 47" (30 cm to 120 cm)
EN
19.7" (50 cm)
1 part
19.7" (50 cm) to
38.2" (97 cm)
2 parts
4
47.2" (1.2 m)
3 parts
Publicidad
