Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information (continued)
PERSONAL SAFETY
WARNING: Operating any
power tool can result in foreign
objects being thrown into your
eyes, which can result in severe
eye damage. Before beginning
operation, always wear safety
goggles, safety glasses with
side shields, or a full face shield
when needed. Always use eye
protection marked to comply
with ANSI Z87.1.
WARNING: This product
contains chemicals known to
the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands
after handling.
1.
shields when operating power tools.
Dust mask, nonskid safety shoes, hard
hat, or hearing protection must be used
for appropriate conditions.
2.
Stay alert when operating a
power tool. Do not use the tool
while tired or under the
influence of drugs, alcohol, or medication.
3.
your hair, clothing, and gloves away
from moving parts. Loose clothes,
jewelry, or long hair can be caught in
moving parts.
4.
Keep proper footing and balance at
all times. Proper footing and balance
enables better control of the tool in
unexpected situations
5.
Do not use on a ladder or unstable support.
Use safety equipment.
Always wear eye
protection with side
Do not wear loose
clothing or jewelry.
Contain long hair. Keep
AIR COMPRESSOR AND
PNEUMATIC TOOL SAFETY
WARNING: Do not attempt
to modify this tool or create
accessories not recommended
for use with this tool. Any such
alteration or modification is
misuse and could result in a
hazardous condition leading to
possible serious personal injury.
CAUTION: Do not use in an
environment that is dusty or
otherwise contaminated. Using
the air compressor in this type of
environment may cause damage
to the unit.
1.
Keep compressors as far from the
spraying area as possible, at least 15 ft.
(0.4 m) from the spraying area and all
explosive vapors.
2.
Risk of Bursting. Do not adjust
regulator to result in output
pressure greater than marked
maximum pressure of attachment. Do not
use at pressure greater than the rated
maximum pressure of this compressor.
3.
If connected to a circuit protected by fuses,
use time-delay fuses with this product.
4.
To reduce the risk of electric
shock, do not expose to rain.
Store indoors.
5.
Ensure the hose is free of obstructions
or snags. Entangled or snarled hoses
can cause loss of balance or footing and
may become damaged.
6.
Use the air compressor only for its
intended use. Do not alter or modify
the unit from the original design or
function. Never weld or drill holes in the
air tank.
7.
Never leave a tool unattended with the
air hose attached.
8.
Do not operate this tool if it does not
contain a legible warning label.
9.
Do not continue to use a tool or hose that
leaks air or does not function properly.
3
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM
Publicidad
