American Standard 7438301 Manual Del Propietário página 5

5
CHECK CONNECTIONS FOR LEAKS
• Move HANDLE into "off" position.
• Turn on water supplies and check
connections for leaks.
• Operate HANDLE up and down, left
and right to flush lines thoroughly.
• Operate SPRAY HEAD and check
connections for leaks.
6
TEST INSTALLED FAUCET
• Move HANDLE (1) into "off" position.
• Turn on water supplies.
• With HANDLE (1) in "off" position, unthread SPRAY
(3) from HOSE (2).
• Operate handle back to front, in COLD and HOT
positions, to flush water lines thoroughly.
• Thread SPRAY HEAD (3) onto HOSE (2).
SPRAY OPERATION
• With faucet on press TOGGLE BUTTON (4)
on SPRAY (3) to switch from stream to spray.
• Press and hold PAUSE BUTTON (5) to temporarily
stop flow from SPRAY (3). Release PAUSE
BUTTON (5) to resume flow from SPRAY (3).
CHECK
CONNECTIONS
FOR LEAKS
REMOVE
3
3
5
STREAM
(AERATOR)
4
SPRAY
1