Descargar Imprimir esta página

BABYTREND HC09 A Serie Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY
two Harness Buckles will pop free
(Fig. 13).
14)
The shoulder
5-point harness:
straps of the 5-point harness have
2 attachment positions. Select the
position that places the shoulder
strap level with, or below, the top
of the child's shoulders (Fig. 14a).
• Carefully place the child in the seat
and position the safety harness
around the child's waist and over
the shoulders. Place the crotch strap
between the child's legs. Insert the
male end of each shoulder / waist
belt into the buckle on the crotch
strap. Tighten the harness to be snug
around the child's waist and over the
child's shoulders (Fig. 14b).
TO RELEASE SAFETY BELT
15)
Push Button on Center Clasp, the
two Harness Buckles will pop free
(Fig. 15).
RECLINE SEAT
16)
• Squeeze recline lever on back of
the seat and adjust to the preferred
recline or upright position
(Fig. 16). Use caution not to trap
arms, hands and fingers when
19
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 14a
Fig. 14b
Center Clasp
Fig. 15
Fig. 16
adjusting recline positions.
TO ADJUST SEAT HEIGHT
WARNING:
Do not
Do not
adjust seat height with
adjust seat height with
child in seat. Adjust seat
child in seat. Adjust seat
height before placing your
height before placing your
child in the high chair.
child in the high chair.
WARNING:
Always
Always
check that the height
check that the height
adjustment bracket is level
adjustment bracket is level
and both left and right
and both left and right
sides locked before placing
sides locked before placing
child in the high chair.
child in the high chair.
WARNING:
Never
Never
rest the height adjustment
rest the height adjustment
bracket on the locking pins.
bracket on the locking pins.
17)
ATTENTION: Applies to Youth
Seat with or without the Booster
Seat attachment. Make sure the
Height Brackets lock on the lowest
position. DO NOT rest Height
Adjustment Brackets on the Locking
Pins (Fig. 17a).
• Squeeze the Release Handles on
both sides simultaneously of the
Height Adjustment bracket (Fig.
17b) and adjust to the ideal position
(Fig. 17c).
DO NOT adjust with child
in the seat.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Release Handle
Fig. 17a
Highest Position
Lowest Position
Locking Pin
Fig. 17b
Fig. 17c
20

Publicidad

loading

Este manual también es adecuado para:

Hc09e86a