Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
•
Tighten the Booster Seat
(3)
onto the chair (Fig. 9f).
• Check that the Booster
is tightly installed by
attempting to move the
Booster Seat from side-to-
side and up. The Booster
Seat should not move more
than 1 inch.
TO REMOVE BOOSTER
SEAT FROM CHAIR
• Unbuckle all straps (Fig. 9g).
Turn Booster Seat over and
store straps away in each
compartment (Fig. 9h).
NOTE: Close each
compartment.
15
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
3
Fig. 9f
Fig. 9g
Fig. 9h
TO ATTACH TRAY
WARNING:
Always check that the high chair is
Always check that the high chair is
locked in the open position before using.
locked in the open position before using.
WARNING:
The tray is not designed to hold
The tray is not designed to hold
the child in the chair. The child should be secured in
the child in the chair. The child should be secured in
the high chair at all times by the 5-point restraining
the high chair at all times by the 5-point restraining
system, either in the reclining, semi-reclining or upright
system, either in the reclining, semi-reclining or upright
position. Stay near and watch child during use. Never
position. Stay near and watch child during use. Never
leave child unattended.
leave child unattended.
10)
• To attach the Tray, line up the
grooves on the bottom of the tray
with the armrests of the high chair.
Push the tray down until it fits
firmly into the slots on the high
chair (Fig. 10a).
• The Tray has a 4-position
adjustment. To adjust the position,
squeeze the Tray's release handle
located underneath the tray and
reposition the tray to the desired
position (Fig. 10b). Release the
Tray's handle. Check that the Tray is
securely locked in its new position.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 10a
4-position
Tray Release located underneath tray
Fig. 10b
16
Publicidad
