STEINEL True Presence COM1 Manual De Instrucciones página 45

– Repairs must only be carried out by companies qualified
to do so.
– Terminal B1/B0 is a switching contact for low-energy
circuits, no more than 1 A. This must be protected by a
fuse of the appropriate rating.
3. System description
Proper use
– Sensor.
– For ceiling mounting indoors.
– Bluetooth interconnection.
– AP version for surface-mounted installation.
– UP version for concealed installation.
Note:
• When installing, please always make sure you allow
a distance of at least 3 m to Wi-Fi routers or access
points.
Sensor-switched types
– True Presence
– Hallway high-frequency sensor
– High-frequency sensor HF 360-2
Sensor variables
The sensor can detect the following sensor variables:
– Presence.
– Light level.
Cable length between sensor and button < 50 m.
Operating principle for presence detection
The True Presence
It reliably identifies human presence and absence by
detecting micro-movements. The detection zone can be
defined with absolute precision via app. This makes it ideal
for use in offices and schools.
high-frequency sensor
®
sensor is a high-frequency sensor.
®
– 45 –
GB
Contents