Publicidad
Idiomas disponibles
Idiomas disponibles
4 Installing ABICAR POWER PAK
4 Installing ABICAR POWER PAK
► Observe the operating instructions for the welding power source.
► Observe the operating instructions for the welding tractor.
► Observe the operating instructions for the welding torch.
4.1 Connecting the welding torch cable assembly
The frictional resistance of the welding wire in the wire guide tube increases with the length of the welding
torch cable assembly.
► Use a welding torch cable assembly with a max. length of 5 m.
Fig. 1
A Coolant return connector
B Euro connector socket
C Coolant supply connector
A
B
C
Connect the welding torch cable assembly to the Euro connector socket (B).
1
Connect the coolant supply hose (blue) of the welding torch cable assembly to the coolant supply
2
connector (C).
Connect the coolant return hose (red) of the welding torch cable assembly to the coolant return
3
connector (A).
EN - 4
7
8
Connecting the welding torch cable assembly
Turn the quick-release clamp tab clockwise to
7
close. Make sure that the tension spring hooks
into the closing angle.
Flip down the quick release clamp tab on the
8
manual torch clamp.
D Communication connecting socket
E iMIG POWER 400 POWER MODULE
D
E
ABICAR POWER PAK
Publicidad
