Thermador Professional Serie Guia De Instalacion página 11

4 Countertop cutout
Countertop cutout
Countertop cutout
Installing side support cleats (both sides)
a Counter sunk screws
Island installation without countertop backsplash
30" Rangetop
A 29¹⁵⁄₁₆" (760 mm)
B 29⅛" (740 mm)
C Island installation: 22¹³⁄₁₆" (580 mm)
Wall installation: 23⁵⁄₁₆" (592 mm)
D ⅜" (10 mm)
E min. ¾" (19 mm)
F Corner notch:
0" (0 mm): Control panel project-
¡
ing 1½" (38 mm) from base cabi-
net face.
¹¹⁄₁₆" (18 mm): Required for stan-
¡
dard 24" (610 mm) deep base
cabinet; Control panel projecting
¹³⁄₁₆" (20 mm) from base cabinet
face.
G 7¹¹⁄₁₆" (195 mm)
H 2x4 corner support
Wall installation with countertop backsplash
Detail X: Corner notch detail at front face of cabinet
36" Rangetop
35¹⁵⁄₁₆" (913 mm)
35⅛" (892 mm)
Island installation: 22¹³⁄₁₆" (580 mm)
Wall installation: 23⁵⁄₁₆" (592 mm)
⅜" (10 mm)
min. ¾" (19 mm)
See column 30" rangetop
7¹¹⁄₁₆" (195 mm)
2x4 corner support
Countertop cutout en-us
48" Rangetop
47¹⁵⁄₁₆" (1,218 mm)
46¼" (1,175 mm)
Island installation: 22¹³⁄₁₆" (580 mm)
Wall installation: 23⁵⁄₁₆" (592 mm)
⅞" (22 mm)
min. ¾" (19 mm)
See column 30" rangetop
7¹¹⁄₁₆" (195 mm)
2x4 corner support
11