SOMFY Roll Up 28 WF RTS II Instrucciones página 19

Roll Up 28 WF RTS II
3.6.2.2.Using the Programming button on the drive head
1] Press and
programming button until the motorised
product briefly moves up and down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Briefly press the PROG. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
NOTICE
Other functions are available, for more information, contact your Somfy
representative.
4.TECHNICAL DATA
Power supply
Frequency bands and maximum
power used
Torque
Speed
Electrical insulation
Minimum distance between
limits
Operating temperature
Protection rating
Charging temperature
Battery type
Battery charging time
Running time
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
hold the drive
12 Vdc SELV
433.050 MHz - 434.790 MHz e.r.p. <10 mW
1.1 N·m
10-28 RPM
III
1 turn
0° to 60°C
IP20 (for indoor use only)
0° to 40°C
Li-ion
4.5 hours maximum
4 minutes
head
1]
2]
0.5 s
B
PROG.
EN
19