Worx WG303E Manual Original página 7

TECHnICAL DATA
Type WG303E (3-designation of machinery, representative of Chain Saw)
Voltage
Rated power
Bar length
Chain speed
Oil tank capacity
Chain pitch
Number of chain links
Chain gauge
Saw chain type
Bar type
Weight (chain & bar
included)
Protection class
nOISE AnD TECHnICAL DATA
A weighted sound pressure
A weighted sound power
Wear ear protection when sound pressure is over
Typical weighted vibration
- That the declared viberation total value has been measured accordance with a standard test
method and may be used for comparing one tool with another;
- That the declared viberation total value may also be used in a preliminary assessment of
exposure.
- That the viberation emission during actual use of the power tool can differ from the decleared
total value depending on the ways in which the tool is used; and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking accounts of all parts of operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time.)
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.
Chain saw
220-240V~50/60Hz
2000W
400mm
12m/s
200ml
ES:91VG
ES:160SDEA041
L :93dB(A) K =3dB(A)
pA PA
L :105dB(A) K =3dB(A)
wA WA
80dB(A)
2
5.2m/s K=1.5m/s
En
3/8"
57
0.05"
4.8kg
/II
7
2