Publicidad
EN
Installation
EN
Before you start
This appliance must be installed correctly by a qualified person, strictly following
the manufacturer's instructions.
WARNING: Danger of electric shock! The power supply must be
cut off before the appliance is installed completely.
• Only a qualified person in compliance with the instructions provided can install the appliance.
The manufacturer declines all responsibility for improper installation, which may harm persons
and animals and cause damage.
• Check the package and make sure you have all of the parts listed.
• Decide on the appropriate location for the appliance.
• This appliance contains glass. Please take care when fitting or handling to prevent personal injury
or damage to the appliance.
• The specifications plate is available on this appliance. This plate displays all the necessary identification
information for ordering replacement parts.
• If you sell the appliance, give it away, or leave it behind when you move house, please ensure you pass
on this set of instructions.
Safety
WARNING: In order to prevent overturning this appliance must be
installed in an appliance larder cabinet and must be used with the
wall brackets supplied with the cabinet.
WARNING: Installation must be performed by a competent person
only. This product could be dangerous, cause injury or damage to
• Some parts could be hazardous to small children.
• Keep all parts out of reach and do not leave children unattended in the assembly area.
• Serious or fatal crushing injuries can occur from furniture tip-over.
To prevent this furniture from tipping over it must be permanently fixed to the wall. Fixing devices
for the wall are not included since different wall materials require different types of fixing devices.
Use fixing devices suitable for the walls in your home.
• Prevent children from climbing or hanging on the drawers, doors or shelves.
• If you are in any doubt as to how to install this product, consult a technically competent person.
CAUTION: Always ensure the product is securely fitted before use.
IMPORTANT RETAIN THIS INFORMATION
FOR FUTURE REFERENCE: READ CAREFULLY.
All parts and full details on how to assemble your appliance larder cabinet are supplied with the appliance
shelf pack.
Assembly Procedure
A) Confirm your larder height from either standard or tall.
B) Decide on your appliance door opening direction and change it if required.
C) Build the cabinet and attach the hinges and decorative doors. Secure the cabinet to the wall.
D) Locate the appliance within the cabinet and secure the fridge to the cabinet.
213294_s1_s4-5059340169538-5059340169651-GoodHome-A5-IM-Multi-V04.indd 6
213294_s1_s4-5059340169538-5059340169651-GoodHome-A5-IM-Multi-V04.indd 6
property if incorrectly installed.
06
21-04-2022 13:20:41
21-04-2022 13:20:41
Publicidad
